1.4162, DIN, DIN EN 10088-4, Stainless steels - Part 4:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes, DIN EN 10088-5, Stainless steels - Part 5:Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes, WB 556, Austenitic-ferritic steel X2CrMnNiN21-5-1; Material No. 1.4162; LDX 2101; Plate, sheet and strip, DIN EN 10088-1
BS EN 10088-2:2014 Stainless steels. Technical delivery BS EN 10088-2:2014. Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes. Status :Confirmed, Current Published :October 2014. Price. £260.00. Member Price. £130.00. Become a member and SAVE 50%.
The corrosion resistance is gener ally considered good if the corro - sion rate is less than 0.1 mm/year. Due to their high chromium content, duplex steels offer excel - lent corrosion resistance in many media. ®LDX 2101 has, in most cases, a better resistance than 4307 and in some cases as good as 4404. 2304 is in most cases equi -
EN 1.4482 (X2CrMnNiMoN21-5-3) Stainless Steel EN 1.4482 stainless steel is a duplex stainless steel formulated for primary forming into wrought products. 1.4482 is the EN numeric designation for this material. X2CrMnNiMoN21-5-3 is the EN chemical designation. It has a moderately low base cost among wrought duplex stainless steels. In addition, it has a moderately high ductility and a moderately low embodied energy.
EN 10088-2 1.4509 Stainless Steel Flat Sheet , 0.6 - 5.0mm High quality EN 10088-2 1.4509 Stainless Steel Flat Sheet , 0.6 - 5.0mm Thickness SS Strip from China, China's leading Stainless Steel Sheet product market, With strict quality control Stainless Steel Sheet factories, Producing high quality EN 10088-2 1.4509 Stainless Steel Flat Sheet , 0.6 - 5.0mm Thickness SS Strip products.
24 rows · EN 10088-2is the material standard for stainless steel sheet, plate and strip for general
Forta range Outokumpu - Stainless steelEN 10088-3:Stainless steels semi-finished products, bars, rods sections for general purposes EN 10088-4:Technical delivery conditions for sheet/plate and strip:EN 10088-5:Technical delivery conditions for bars, rods wire, sections and bright products of corrosion resisting steels for construction purposes :EN 10095
Overview of steel grades according to DIN EN 1008831 1.4501 X2CrNiMoCuWN25-7-4 Austenitic-ferritic 32 1.4507 X2CrNiMoCuN25-6-3 Austenitic-ferritic 1. According to DIN EN 10088-1. 2. For these steel grades there are higher strengths produced by strain hardening according to DIN EN 1993-1-4/NA. 3. The required corrosion resistance class results from DIN EN 1993-1-4, Appendix A. 4. Applies only to bright metallic surfaces. 5. Austenitic-ferritic steels are also referred to as duplex steels. 6. DIN EN 1993-1-4 or DIN EN 1993-1
EN 10088-1:2014 (E) 5 1 Scope This European Standard lists the chemical composition of stainless steels, which are subdivided in accordance with their main properties into corrosion resisting steels, heat resisting steels and creep resisting
Stainless Steel EN 1.4301 AISI 304 X5CrNi18-10 UNSS30400Reliable is a Stockist Supplier and Distributor of Stainless Steel EN 1.4301 AISI 304 Pipes, Plates, Sheets, Tubes, Fittings, Flanges EN 10088-2 1.4301:EN 10272 1.4301:ASTM A358 UNS S30400:EN 10269 1.4301:EN 10088-2 X5CrNi18-10: High corrosion resistance. Easy formability. Not resistant to intergranular corrosion.
Stainless steel flat products for building the grades in content of EN 10088-4 as such. The text in black contains comments and additional practical information. Introduction 1 EN 10088 Stainless Steels, Part 1:2005 List of stainless steels Part 2:2005 Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for
EN 10088-1:2005 (E) 6 Table 2 Chemical composition (cast analysis) a of ferritic corrosion resisting steels Steel designation % by mass Name Number C max. Si max. Mn max. P max. SN max. Cr Mo Nb Ni Ti Others X2CrNi12 1.4003 0,030 1,00 1,50 0,040 0,015 b 0,030 10,5 to 12,5 - - 0,30 to 1,00 - -
Wall brackets SYSTEA-NAThese non-combustible stainless steel wall brackets made from alloy EN 10088-2; 1.4162 have a very low thermal conductivity (European class A+ to B). They are available in lengths from 60 mm to 300 mm and are used for fixing onto concrete/masonry or wooden/metal frameworks, mainly as a carrier for the ALKAPO subframe system.EN 10088-2 - Stainless Steel Tube Stainless Steel Pipe3.1 stainless steels definition in EN 10088-1 applies 3.2 corrosion resisting steels steels with at least 10,5 % Cr and max. 1,20 % C if theiresistanceto corrosion is of primary impotanee 3.3 product forms definitions in EN 10079 apply 3.4 types of heat-treatment definitions in EN